- Reduced price
Lorentz PS600CS-15-1 - Solar Swimming Pool pump
The lorentz PS600CS-15-1 centrifugal swimming pool pump,
100% secure site with SSL certificate and committed to Confianza Online.
Delivery time: 1-4 weekdays for products in stock or since the payment is received through wire transfer, Paypal and credit card.
The Badu TOP centrifugal swimming pool pump,
renamed to PS600CS-15-1 for solar and or battery operation. Upto 10 hours of
trouble free direct solar pumping with a flow rate up to 15 m3/h.
Very simple installation.
maintenance-free thanks to brushless DC motor.
high reliability and life expectancy.
2 years manufacturer's warranty against defects in material and workmanship
swimming pool water circulation through a filter system and thermal collectors pond management irrigation aquariums etc.
Pump end (PE) monoblock-type pump with integrated strainer tank bellow mechanical seal is mounted on a plastic shaft protected sleeve
motor/pump shaft has no contact with fluid - total electric separation
strainer capacity approx. 3 l
strainer basket mesh size approx. 3.2 x 2.6 mm
Material used for pump end, pump casing, strainer basket: PP
flange, gland housing: PP TV 40
diffuser: PP TV 40
impeller: PA 66 GF 30 / PC
lid: PC, transparent
mechanical seal: carbon / ceramic / NBR
bolts: steel, galvanized
ECDRIVE 600 BADU Top brushless, maintenance-free DC motor
controlling of the pump system and monitoring of the operating states mounted at surface (no submerged electronic parts)
two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
automatic reset 20 minutes after well/pool probe turns pump off
protected against reverse polarity, overload and high temperature
speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
solar operation: integrated MPPT (Maximum Power Point Tracking)
battery operation: low voltage disconnect and restart after battery has recovered
max. efficiency 92 % (motor + controller)
max. flow rate [m3/h] 15 (solar), 13 (battery)
max. lift [m] 14 solar, 13 battery
ambient temperature [oC] -30 to +45
input voltage solar generator: nominal voltage 48-72 V DC
open circuit voltage max. 150 V DC
battery, DC source: nominal voltage 48 V DC
type of enclosure IP 54
dimensions (net/packing) 395 x 175 x 165 mm / 450 x 250 x 250 mm = 0.027 m3
weight (net/gross) 4.5 kg / 5.3 kg
motor max. power input [W] 600
type of enclosure IP X4
class of insulation F
suction / max. positive inlet lift 3.0 m
max. casing pressure 2.5 bar
max. water temperature +60 oC
Motor + Pump End ECDRIVE 600 BADU Top + BADU Top 12 520 x 220 x 350 mm = 0.0400 m3
weight (net / gross) 8.7 kg / 9.7 kg
8 other products in the same category:
Shurflo 9325 submersible pump LCB-G75 Linear current booster with dry running protection probes. Also protects pump in the early morning and late afternoon when not enough solar energy is available
Flopower professional smooth running high flow 26 L/ minute diaphragm pump. 12 and 24V versions
Pezzas OHV petrol powered water pump with Honda Gx240 clone engine.
Flojet Triplex Pressure pump. 11Litres/minute and 3.4 Bar maximum pressure. Small and compact self priming pump 12VDC
The Shurflo 2088-443-144 pump is a small and compact self priming pump, available in 12VDC
DC powered diesel pump.